Electronics
DL241 (DL241)
Drawmer DL241 stereo compressor limiter.
ONE ONLY AT THIS SPECIAL CLEARANCE PRICE
Since it's introduction the DL241 has set new standards of sonic excellence well suited for a vast range of broadcast, sound reinforcement, and recording applications. It's extensive controls, with many optional automatic functions, allow the engineer to achieve optimum results in the minimum set up time, without compromising the skilled user. It's sophisticated design produces a smooth, transparent sonic performance
See the full specs and press reviews at www.drawmer.com
Technical Specification (All measurements taken at +4dBu operating level)
Input/Output Connections: TRS (balanced) Jack
Input Impedance: 20k ohm
Maximum Input Level: +20dBu
Output Impedance: 50 ohm (balanced), 100 ohm (unbalanced)
Maximum Output Level: + 20dBu
Bandwidth: <10Hz to 22kHz (1 dB)
Crosstalk: -85dB @ 20kHz
Noise at Unity Gain (with Expander Off)
AV: Wideband 90dB, 22Hz-22kHz 95dB, CCIRARM 95dB, IECA 97dB, Q-Pk CCIR 84dB
RMS: Wideband -88dB, 22Hz-22kHz 93dB, CCIRARM 93dB, IECA 95dB, Q-Pk CCIR -82dB
Distortion +4dBu input: 100Hz <0.03%, 1kHz <0.04%
+14dBu input: 100Hz <0.01%, 1kHz <0.01%, 10kHz <0.01%
Power Requirements: 93-125V orl85-250V at S0-60Hz 9 Watts
ONE ONLY AT THIS SPECIAL CLEARANCE PRICE
Since it's introduction the DL241 has set new standards of sonic excellence well suited for a vast range of broadcast, sound reinforcement, and recording applications. It's extensive controls, with many optional automatic functions, allow the engineer to achieve optimum results in the minimum set up time, without compromising the skilled user. It's sophisticated design produces a smooth, transparent sonic performance
See the full specs and press reviews at www.drawmer.com
Technical Specification (All measurements taken at +4dBu operating level)
Input/Output Connections: TRS (balanced) Jack
Input Impedance: 20k ohm
Maximum Input Level: +20dBu
Output Impedance: 50 ohm (balanced), 100 ohm (unbalanced)
Maximum Output Level: + 20dBu
Bandwidth: <10Hz to 22kHz (1 dB)
Crosstalk: -85dB @ 20kHz
Noise at Unity Gain (with Expander Off)
AV: Wideband 90dB, 22Hz-22kHz 95dB, CCIRARM 95dB, IECA 97dB, Q-Pk CCIR 84dB
RMS: Wideband -88dB, 22Hz-22kHz 93dB, CCIRARM 93dB, IECA 95dB, Q-Pk CCIR -82dB
Distortion +4dBu input: 100Hz <0.03%, 1kHz <0.04%
+14dBu input: 100Hz <0.01%, 1kHz <0.01%, 10kHz <0.01%
Power Requirements: 93-125V orl85-250V at S0-60Hz 9 Watts
DL241XLR (DL241XLR)
Drawmer DL241 stereo compressor limiter.
ONE ONLY EX-DISPLAY AT £499
Since it's introduction the DL241 has set new standards of sonic excellence well suited for a vast range of broadcast, sound reinforcement, and recording applications. It's extensive controls, with many optional automatic functions, allow the engineer to achieve optimum results in the minimum set up time, without compromising the skilled user. It's sophisticated design produces a smooth, transparent sonic performance
See the full specs and press reviews at www.drawmer.com
Technical Specification (All measurements taken at +4dBu operating level)
Input/Output Connections: XLR3 (Pin 2+)
Input Impedance: 20k ohm
Maximum Input Level: +20dBu
Output Impedance: 50 ohm (balanced), 100 ohm (unbalanced)
Maximum Output Level: + 20dBu
Bandwidth: <10Hz to 22kHz (1 dB)
Crosstalk: -85dB @ 20kHz
Noise at Unity Gain (with Expander Off)
AV: Wideband 90dB, 22Hz-22kHz 95dB, CCIRARM 95dB, IECA 97dB, Q-Pk CCIR 84dB
RMS: Wideband -88dB, 22Hz-22kHz 93dB, CCIRARM 93dB, IECA 95dB, Q-Pk CCIR -82dB
Distortion +4dBu input: 100Hz <0.03%, 1kHz <0.04%
+14dBu input: 100Hz <0.01%, 1kHz <0.01%, 10kHz <0.01%
Power Requirements: 93-125V orl85-250V at S0-60Hz 9 Watts
ONE ONLY EX-DISPLAY AT £499
Since it's introduction the DL241 has set new standards of sonic excellence well suited for a vast range of broadcast, sound reinforcement, and recording applications. It's extensive controls, with many optional automatic functions, allow the engineer to achieve optimum results in the minimum set up time, without compromising the skilled user. It's sophisticated design produces a smooth, transparent sonic performance
See the full specs and press reviews at www.drawmer.com
Technical Specification (All measurements taken at +4dBu operating level)
Input/Output Connections: XLR3 (Pin 2+)
Input Impedance: 20k ohm
Maximum Input Level: +20dBu
Output Impedance: 50 ohm (balanced), 100 ohm (unbalanced)
Maximum Output Level: + 20dBu
Bandwidth: <10Hz to 22kHz (1 dB)
Crosstalk: -85dB @ 20kHz
Noise at Unity Gain (with Expander Off)
AV: Wideband 90dB, 22Hz-22kHz 95dB, CCIRARM 95dB, IECA 97dB, Q-Pk CCIR 84dB
RMS: Wideband -88dB, 22Hz-22kHz 93dB, CCIRARM 93dB, IECA 95dB, Q-Pk CCIR -82dB
Distortion +4dBu input: 100Hz <0.03%, 1kHz <0.04%
+14dBu input: 100Hz <0.01%, 1kHz <0.01%, 10kHz <0.01%
Power Requirements: 93-125V orl85-250V at S0-60Hz 9 Watts
DS201 (DS201)
ONE ONLY AT THIS SPECIAL CLEARANCE PRICE £499
The Drawmer DS201 is a sophisticated dual channel noise gate incorporating a number of features pioneered by Drawmer, which are invaluable to the sound engineer, and not found on conventional noise gates.
- variable high pass and low pass filters for frequency conscious gating
- comprehensive envelope control, attack, hold, decay, and range - key input for external triggering
- key listen facility
- extremely fast attack time, to preserve the natural attack of the sound
- balanced inputs and outputs
- stereo linkable
- can be used for Gating or Ducking
- high audio specification
These features and its user friendliness have made it the industry standard throughout the world, by which all other gates are judged.
Technical Specification
Connectors: XLR
Input impedance: 20k ohms balanced
Maximum input level: +21dBu
Bandwidth: +1dB 20Hz to 34kHz
Noise: (Ref to 4dBu gate open) -93dB (Ref to +4dBu gate closed) -98dB
Headroom: (Ref to +4dBu) -16dB
Dynamic Range: 116dB
Crosstalk: -80dB @ 10kHz
Key input impedance: 100k
Distortion: 0dBu: 100Hz .015%, 1kHz .005%, 10kHz .015%
+1OdBu: 100Hz .015%, 1kHz .005%, 10kHz .02%
Maximum output: 21dBu
Outputs Floating balanced
Control ranges: LF Filter 25Hz to 4kHz, HF Filter 250Hz to 35kHz
Threshold infinity to -54dB
Attack 10 microseconds to 1 sec
Hold 2 ms to 2 sec
Decay 2 ms to 4 sec
Range -80dB to 0dB
Function switches: Key Source: External/lnternal, Gate/Duck, Key
Listen/Gate/Bypass, Stereo Link
LEDs (Gatemode): Green: Gate open (Signal above threshold), Yellow: Gate open (Visual indication of attack hold and decay characteristics), Red: Gate closed (Signal below threshold)
LEDS (Duck mode): Green: Signal not attenuated, Yellow Hold time, Red: Signal attenuated (according to range control)
The Drawmer DS201 is a sophisticated dual channel noise gate incorporating a number of features pioneered by Drawmer, which are invaluable to the sound engineer, and not found on conventional noise gates.
- variable high pass and low pass filters for frequency conscious gating
- comprehensive envelope control, attack, hold, decay, and range - key input for external triggering
- key listen facility
- extremely fast attack time, to preserve the natural attack of the sound
- balanced inputs and outputs
- stereo linkable
- can be used for Gating or Ducking
- high audio specification
These features and its user friendliness have made it the industry standard throughout the world, by which all other gates are judged.
Technical Specification
Connectors: XLR
Input impedance: 20k ohms balanced
Maximum input level: +21dBu
Bandwidth: +1dB 20Hz to 34kHz
Noise: (Ref to 4dBu gate open) -93dB (Ref to +4dBu gate closed) -98dB
Headroom: (Ref to +4dBu) -16dB
Dynamic Range: 116dB
Crosstalk: -80dB @ 10kHz
Key input impedance: 100k
Distortion: 0dBu: 100Hz .015%, 1kHz .005%, 10kHz .015%
+1OdBu: 100Hz .015%, 1kHz .005%, 10kHz .02%
Maximum output: 21dBu
Outputs Floating balanced
Control ranges: LF Filter 25Hz to 4kHz, HF Filter 250Hz to 35kHz
Threshold infinity to -54dB
Attack 10 microseconds to 1 sec
Hold 2 ms to 2 sec
Decay 2 ms to 4 sec
Range -80dB to 0dB
Function switches: Key Source: External/lnternal, Gate/Duck, Key
Listen/Gate/Bypass, Stereo Link
LEDs (Gatemode): Green: Gate open (Signal above threshold), Yellow: Gate open (Visual indication of attack hold and decay characteristics), Red: Gate closed (Signal below threshold)
LEDS (Duck mode): Green: Signal not attenuated, Yellow Hold time, Red: Signal attenuated (according to range control)
MX30 (MX30)
ONE ONLY AT THIS SPECIAL CLEARANCE PRICE
The Drawmer MX30 is a clean, natural sounding, variable ratio soft-knee compressor with useful features. The controls are kept to a simple minimum, reminding me a bit of the old dbx 160.
The first section is a gate threshold control with switchable fast/slow release. The familiar Drawmer LEDs show the gate status. The second section has the compress threshold level and ratio controls and an LED meter showing gain reduction. The third section has a gain make-up level and peak limit level, able to give a bullet proof safety limit. The LED metering here shows input or output levels which can be usefully compared by pressing the bypass switch during setup. Rear features include balanced XLR (+4dB) and unbalanced jack (-10dB) ins and outs. The MX30 can run in either dual mono or stereo linked mode.
Summary: Easy to use and learn, even for those with little experience of compressors. The front panel artwork makes it really easy to understand and the extensive LED displays show you exactly what the unit is doing. The build quality is good and robust and it has a proper power supply built in (so no more wall warts). The choice of interfaces makes it quite suitable for home and professional applications. Excellent value for money.
Check out the reviews at www.drawmer.com
Technical Specification
(All measurements taken at +4dBu operating level)
Input/Output Connections: XLR (Pin 2+) and Jack (unbalanced)
Input Impedance: 20kOhm (bal) / 4kOhm unbalanced
Maximum Input Level: +21dBu
Output Impedance: 50 ohm (balanced), 100 ohm (unbalanced)
Bandwidth: <10Hz to 36kHz (-1dB)
Noise at Unity Gain (gate off)
RMS: -101dB, 22Hz-22kHz
Crosstalk: @ 1kHz >-100dB
@ 10kHz >-94dB
Distortion
+4dBu input: <0.02%, 1kHz
+14dBu input: <0.2%, 1kHz (10dB gain reduction)
Power Requirements: 115V or 230V at 50-60Hz 9 Watts
Dimensions: 482 x 44 x 200mm
Shipping Weight: 3.2kg
The Drawmer MX30 is a clean, natural sounding, variable ratio soft-knee compressor with useful features. The controls are kept to a simple minimum, reminding me a bit of the old dbx 160.
The first section is a gate threshold control with switchable fast/slow release. The familiar Drawmer LEDs show the gate status. The second section has the compress threshold level and ratio controls and an LED meter showing gain reduction. The third section has a gain make-up level and peak limit level, able to give a bullet proof safety limit. The LED metering here shows input or output levels which can be usefully compared by pressing the bypass switch during setup. Rear features include balanced XLR (+4dB) and unbalanced jack (-10dB) ins and outs. The MX30 can run in either dual mono or stereo linked mode.
Summary: Easy to use and learn, even for those with little experience of compressors. The front panel artwork makes it really easy to understand and the extensive LED displays show you exactly what the unit is doing. The build quality is good and robust and it has a proper power supply built in (so no more wall warts). The choice of interfaces makes it quite suitable for home and professional applications. Excellent value for money.
Check out the reviews at www.drawmer.com
Technical Specification
(All measurements taken at +4dBu operating level)
Input/Output Connections: XLR (Pin 2+) and Jack (unbalanced)
Input Impedance: 20kOhm (bal) / 4kOhm unbalanced
Maximum Input Level: +21dBu
Output Impedance: 50 ohm (balanced), 100 ohm (unbalanced)
Bandwidth: <10Hz to 36kHz (-1dB)
Noise at Unity Gain (gate off)
RMS: -101dB, 22Hz-22kHz
Crosstalk: @ 1kHz >-100dB
@ 10kHz >-94dB
Distortion
+4dBu input: <0.02%, 1kHz
+14dBu input: <0.2%, 1kHz (10dB gain reduction)
Power Requirements: 115V or 230V at 50-60Hz 9 Watts
Dimensions: 482 x 44 x 200mm
Shipping Weight: 3.2kg
SZI1015 - ex-rental (SZI1015)
Sennheiser SZI-1015
The SZI-2015 is a wideband infra-red slave radiator for high quality mono or stereo audio operation. Requires SZI-1015T or SET810 modulator/emitter or SI-1015 modulator. Due to its compact size and relatively high radiating power, the SZI-1015T modulator/radiator is an ideal choice for medium-sized rooms up to 400m2, for covering recesses or for applications which require transmission of audio information to well defined zones, e.g. in cinemas, theatres, meeting rooms, offices, lecture theatres, conference rooms, board rooms, etc. Features: 2-Watt radiator with a maximum coverage area of 400 m2 chaining the signal to additional radiators features monitoring diodes and a separate barrier strip with RF and DC outputs for connecting radiators Wide range of mounting accessories for the radiator One transmitter can be picked up by several Stethoset and/or neck loop receivers. Technical Data System Modulation: N/A Carrier frequencies: 2.3 / 2.8mHz at 5kHz AF frequency response: 40 - 15kHz S/N ratio: 60 dB A rms THD: <2% at 120bD Transmitter: SZI-1015: Dimensions: 250 x 100 x 80 mm RF input connector: BNC - socket RF output link connector: BNC - Socket Weight: 1,3 kg Current consumption: 0,7 A bei 25 V Operating voltage (mains): 25-30 V DC with dedicated NT1015 PSU Input voltage range: 50 mV - 3 V Effective radiated power: 2 W IR Diodes: 72 Max. coverage area: 400 m2 Threshold for automatic on/off function: 50 mV DDA - Disability Discrimination Act compliant
The SZI-2015 is a wideband infra-red slave radiator for high quality mono or stereo audio operation. Requires SZI-1015T or SET810 modulator/emitter or SI-1015 modulator. Due to its compact size and relatively high radiating power, the SZI-1015T modulator/radiator is an ideal choice for medium-sized rooms up to 400m2, for covering recesses or for applications which require transmission of audio information to well defined zones, e.g. in cinemas, theatres, meeting rooms, offices, lecture theatres, conference rooms, board rooms, etc. Features: 2-Watt radiator with a maximum coverage area of 400 m2 chaining the signal to additional radiators features monitoring diodes and a separate barrier strip with RF and DC outputs for connecting radiators Wide range of mounting accessories for the radiator One transmitter can be picked up by several Stethoset and/or neck loop receivers. Technical Data System Modulation: N/A Carrier frequencies: 2.3 / 2.8mHz at 5kHz AF frequency response: 40 - 15kHz S/N ratio: 60 dB A rms THD: <2% at 120bD Transmitter: SZI-1015: Dimensions: 250 x 100 x 80 mm RF input connector: BNC - socket RF output link connector: BNC - Socket Weight: 1,3 kg Current consumption: 0,7 A bei 25 V Operating voltage (mains): 25-30 V DC with dedicated NT1015 PSU Input voltage range: 50 mV - 3 V Effective radiated power: 2 W IR Diodes: 72 Max. coverage area: 400 m2 Threshold for automatic on/off function: 50 mV DDA - Disability Discrimination Act compliant
Tecpro BP111 (BP111)
SPECIAL EX_HIRE CLEARANCE PRICE
For sale in UK only.
Tecpro Technical Projects BP111 beltpack only (no PSU or headphones included - for sale separately).
Industry standard wired theatre communication walkie talkie.
BP111 single circuit belt pack can be used with DMH220 dual muff headset or DMH 210 single muff headset.
Illuminated call switch, volume control. XLR3 input and output link, connecting via standard mic leads or multicore. Requires Master Station or PSU to operate. Compatible with MS721 / MS731 / MS741 Master stations or PS711 / PS751 / PS753 / PS754 PSUs.
System fully compatible with ASL and other standard systems.
- 1