Flat

Sort By:  
BELT D21 (BELT D21 L=66mm)
BELT D21

Hitachi SDT400 music centre.

Replacement flat section Butadiene rubber drive belt to fit many hi-fi turntables and other diverse units; eg tape recorders, cassette decks, 8 track, VCRs, tools, models and toys.

Dimensions:
Diameter:21mm
Circumference:66mm
Width:4mm

Special Note: Please check that this is indeed the correct belt for your machine because this is a very unusual belt size – about the size of a finger ring. A common mistake people make is to mix up 66mm with 66cm (=660mm) so perhaps we could ask you to take a moment to double check the size before placing your order.
£8.50
BELT037801660 (BELT03780166 L=128mm)
BELT037801660

Replacement flat section neoprene rubber drive belt to fit many hi-fi turntables and other diverse units; eg tape recorders, cassette decks, 8 track, VCRs, tools, models and toys.

Dimensions:
Diameter:41mm
Circumference:128mm
Width:7.0mm
£15.54
BELT04 (BELT04 L=870mm)
BELT04 - Discontinued - For closest equivalent, see BELT458

Fits Aiwa PXE770, Bergmann Sindre, Fisher MT75, Philips, Pioneer PL50A, Sonab 75S, 85S, Yamaha CS50P, MSC5B, YP400 and others.

Replacement flat section Butadiene rubber drive belt to fit many hi-fi turntables and other diverse units; eg tape recorders, cassette decks, 8 track, VCRs, tools, models and toys.

Dimensions:
Diameter:277mm
Circumference:870mm
Width:6.0mm
£23.95
BELT1 (BELT1 L=85mm)
BELT1

Replacement flat section Butadiene rubber drive belt fits Aiwa CXNR10K CD, Philips battery turntable ( 4 79), CD plus many hi-fi and other diverse units; eg tape recorders, cassette decks, 8 track, VCRs, tools, models and toys.

Dimensions:
Diameter:27mm
Circumference:85mm
Width:1mm
£8.50
BELT10 (BELT10 L=276mm)
BELT10

Fits Aiwa AD2000K ( 72), Akai cass, B&O 2002 ( 62), 2200 ( 62 965), Goodmans Delta 900P, Fostex 160 4 track cassette, Hitachi 8 track, Jones Planetron 8tk, Leak 3007, Marantz 5010 ( 80), Mitsubishi DT4700S, Motorola TF875AX 8tk, National Panasonic CTF500, Pioneer CTF500, CT506, CTF600 ( 84 847), CT-F8080 ( 78 92), Raleigh 8tk, Realistic TR882 8tk, Sharp VZ3000 ( 86), Silver ST858 reel-to-reel, Sinclair Spectrum ZX printer, Sony RC2045D, Tandy TR882 8tk, Tascam 244 Portastudio ( 86), Yamaha MT2X.

Replacement flat section Butadiene rubber drive belt to fit many hi-fi turntables and other diverse units; eg tape recorders, cassette decks, 8 track, VCRs, tools, models and toys.

Dimensions:
Diameter:88mm
Circumference:276mm
Width:4.0mm
£8.50
BELT11 (BELT11 L=294mm)
BELT11

Fits Aiwa TRP-4001 8tk, Amstrad twin cass (&128), B&O 5000, Garrard GC300, Italian Echo Unit, JVC DL8F4, Lynx UL850 8tk, Marantz SD4000 (&83), Pioneer CT3000M, Prinxsound SM8 8tk, Ampro projector, Radiomobile 104SR, 106SR, 108SR, 109QS 8tk, Sharp 102, RT811E, SR561E 8tk, Sony SL8000E VCR, SL8080E Betamax, Stereo 8 8tk, Simms-Watt echo, Tandberg TCD310 Mk2, Tascam 246 Portastudio, Teac A400, Telefunken Magnetophone 85 (&18 &1185).

Replacement flat section Butadiene rubber drive belt to fit many hi-fi turntables and other diverse units; eg tape recorders, cassette decks, 8 track, VCRs, tools, models and toys.

Dimensions:
Diameter:93.5mm
Circumference:294mm
Width:5.0mm
£8.50
BELT11.5 (BELT11.5 L=305mm)
BELT11.5

Fits Corning 965D CO2 analyser, Musi-Tapes 8050R 8tk, Sharp RT811E 8tk, Sony HMK33 (&847), SL8000E, SL8080E, Yamaha K320 (&985), 965D CO2 analyser.

Replacement flat section Butadiene rubber drive belt to fit many hi-fi turntables and other diverse units; eg tape recorders, cassette decks, 8 track, VCRs, tools, models and toys.

Dimensions:
Diameter:97mm
Circumference:305mm
Width:5.0mm
£8.50
BELT12 (BELT12 L=308mm)
BELT12

Fits Aiwa AD1800 cass, Alba MS6280CD music centre, BSR T145/MR2 1250ASNP, TD8-3V, TD8-S, DC3035, LC3042 S23T 8tk,Dokorder DOK-MC60 8tk, EDM, Goldring 8tk, Hitachi TPQ124A 8tk, SDT7785 music centre, Leak 3000 cass, Motorola 8tk, Radiomobile 108SRN/P 8tk, Sanyo projector, Sharp RT811E 8tk, VC6000, VC6200 VHS, Teac A360 cass (&74 &1155 &114 &995), Thorens TD124 Mk2, Thrpe Grenville - BSR T145 8tk.

Replacement flat section Butadiene rubber drive belt to fit many hi-fi turntables and other diverse units; eg tape recorders, cassette decks, 8 track, VCRs, tools, models and toys.

Dimensions:
Diameter:99mm
Circumference:308mm
Width:6.0mm
£8.50
BELT12.5 (BELT12.5 L=317mm)
BELT12.5

Fits Akai 4000DB ( 129), M4, M5, M6 reel-to-reel, Ampex reel-to-reel, BSR T145/Mk3, CC3117, S18 R L1 8tk, Clarion PE404 8tk, Decca CD1000 8tk, Fostex R8, Panasonic NV8150, Sanyo STK011 8tk.

Replacement flat section Butadiene rubber drive belt to fit many hi-fi turntables and other diverse units; eg tape recorders, cassette decks, 8 track, VCRs, tools, models and toys.

Dimensions:
Diameter:101mm
Circumference:317mm
Width:6.0mm
£8.50
BELT12.8 (BELT12.8 L=333mm)
BELT12.8

Replacement flat section Butadiene rubber drive belt to fit Akai 4000DS, Panasonic STK011 and many hi-fi turntables and other diverse units; eg tape recorders, cassette decks, 8 track, VCRs, tools, models and toys.

Dimensions:
Diameter:106mm
Circumference:333mm
Width:6.0mm
£8.50
BELT13 (BELT13 L=339mm)
BELT13

Fits Bush BHK41, Dual CS505 Mk1, 2, 3, 4, Audio Concept, Hitachi SDT300 cassette, Philips N1500 VCR, Realistic SCP25 (&86, &76), Tascam 338 portastudio, Teac T440, Thorens TD124, Yamaha TC800GL, Wien 8TD3 8 track (&3.2), 965D CO2 analyser.

Replacement flat section Butadiene rubber drive belt to fit many hi-fi turntables and other diverse units; eg tape recorders, cassette decks, 8 track, VCRs, tools, models and toys.

Dimensions:
Diameter:108mm
Circumference:339mm
Width:5.2mm
£8.50
BELT14 (BELT14 L=355mm)
BELT14

Fits Akai GX215D, GXC325D, GX221D, GXR-82D, Bel-Air CHR404 8 track, Fostex 250 4tk Portastudio, Realistic SCT80, Sharp VC7300, VC7700 VCR, Sonifex 8tk, Teac A1230, X300.

Replacement flat section Butadiene rubber drive belt to fit many hi-fi turntables and other diverse units; eg tape recorders, cassette decks, 8 track, VCRs, tools, models and toys.

Dimensions: Diameter:113mm
Circumference:355mm
Width:6.0mm
£8.50
BELT14.5 (BELT14.5 L=364mm)
BELT14.5

Please note new part number, April 2021. Was previously BELT14L.

Fits Tascam 22-2, 22-4, 30-4, 32, 32-2, 33-4, 34, 35-2, 38, Teac A3340S, A3440, X3, X1000M reel-to-reel.

Replacement flat section Butadiene rubber drive belt to fit many hi-fi turntables and other diverse units; eg tape recorders, cassette decks, 8 track, VCRs, tools, models and toys.

Dimensions: Diameter:116mm
Circumference:364mm
Width:10.0mm
£13.95
BELT14.5S (BELT14.5S L=364mm)
BELT14.5S

Please note new part number, April 2021. Was previously BELT14L.

Fits Akai GXR-82D 8tk.

Replacement flat section Butadiene rubber drive belt to fit many hi-fi turntables and other diverse units; eg tape recorders, cassette decks, 8 track, VCRs, tools, models and toys.

Dimensions: Diameter:116mm
Circumference:364mm
Width:5.0mm
£8.50
BELT15 (BELT15 L=383mm)
BELT15

Fits Alba MS4200, Akai A600-11N,CR81D 8tk, Amstrad TS33, BSR A11G, P163, P200, P232, P246, P281, BDS95, Era Mk6, Ferguson System 15 3949D, Goodmans FX9750, Hinari HI450CD, Ion USB, Lenco L60, L75, Murphy HF632P, Panasonic RS770S, Philips, Sansui SD5050, Sanyo MR929 ( 101L 111 60020), Technics 671, Thorens TD280 Mk4, Trio KX-710, KX-720.

Replacement flat section Butadiene rubber drive belt to fit many hi-fi turntables and other diverse units; eg tape recorders, cassette decks, 8 track, VCRs, tools, models and toys.

Dimensions:
Diameter:122mm
Circumference:383mm
Width:6.0mm
£8.50
BELT17 (BELT17 L=395mm)
BELT17

Replacement flat section Butadiene rubber drive belt to fit Alba MS4170CD, MS6281CD, Amstrad MS45, Binatone Studio5, BSR TTOP208, Bush MS716, Classic 9999, Coopers HF632P, Crossley CR6019D, Linasound DJ Carnia, Dynatron SRX80, Ferguson 3057C, Goodmans 3500, ION USB Quick Flash, Murphy HF632P, TCD982W, Philips F1485, Samsung SCM6100, SCM6550, Steepletone Roxy2, SMC1033PRO, York, Tektronic DC300XL, Tensai TD855L and many hi-fi turntables and other diverse units; eg tape recorders, cassette decks, 8 track, VCRs, tools, models and toys.

Dimensions:
Diameter:126mm
Circumference:395mm
Width:3.0mm
£8.50
BELT18 (BELT18 L=424mm)
BELT18

Replacement flat section Butadiene rubber drive belt to fit Audiophile Concept AC420, Bang and Olufsen B&O 9500, Garrard 125SB, 0100SB, 35SB, 86SB, GT20, SB86, SB86 mk2, Ekco ZU9, Heybrook TT2, Hitachi HT20S, Matsui CDM20 ( 90), Philips F1485, FCD285 music centre, Pink Triangle PT Too, PT Anniversary, PT Export, Little Pink Thing, Pye Project 6000, 6119/35, Real Sound Company RSC2. Schneider Midi2100UK, Teac A-1300, X10 reel to reel, Telefunken Magnetophone 85 ( 11 1185), Thorens TD180 and many hi-fi turntables and other diverse units; eg tape recorders, cassette decks, 8 track, VCRs, tools, models and toys.

Dimensions:
Diameter:135mm
Circumference:424mm
Width:4.5mm
£8.50
BELT18.5 (BELT18.5 L=427mm)
BELT18.5

Replacement flat section Butadiene rubber drive belt to fit many hi-fi turntables and other diverse units; eg tape recorders, cassette decks, 8 track, VCRs, tools, models and toys.

This belt is our closest available match for Teac 110, A-1030, A-1200, A-1300, A-1340, A-1500, A-1600, A-2070, A-4000, A-4000S, A-4010, A-4010S, A-4010SL, A-4010GSL, A-4020, A-4070, X-7, X-7R, X-7R Mk2, X-10, X-10 Mk2, X-10R, X-10R Mk2, X-20R, X-700R, X-1000, X-1000R (not X-1000M), X-2000, X-2000B, X-2000R (not X-2000M) reel to reels. The length is correct but please note the original Teac belts were 8mm wide. Dimensions:
Diameter:136mm
Circumference:427mm
Width:5mm
£8.50
BELT1804 (BELT1804 L=424mm)
BELT1804

Replacement flat section Butadiene rubber drive belt to fit Leak Truspeed and many other hi-fi turntables and other diverse units; eg tape recorders, cassette decks, 8 track, VCRs, tools, models and toys.

Dimensions:
Diameter:135mm
Circumference:424mm
Width:4mm
£11.90
BELT2 (BELT2 L=99mm)
BELT2

Replacement flat section Butadiene rubber drive belt to fit Grundig 2X4 VCR, Realistic Twin cass/karaoke (x2 2.3 2x2.6) and many hi-fi turntables and other diverse units; eg tape recorders, cassette decks, 8 track, VCRs, tools, models and toys.

Dual CS505 pitch control: As we explain in our YouTube tutorial and on our web site, the original Dual, fixed length, toothed belt is no longer available so we have tried and tested this practical alternative; BELT2. It is made of synthetic rubber, so it relies on some stretch in order for it to grip properly and drive the speed changer. Yes, this is a different method to the original but it is a practical solution which works. Dimensions:
Diameter:31.5mm
Circumference:99mm
Width:3.0mm
£8.50
Per Page      1 - 20 of 94